PRESSING INSTRUCTIONS

DTF/THIN MATTE CLEAR FILM HEAT TRANSFERS
Pre-Press Garment for 5 seconds to get out any moisture.
Temp: 300-325°F
Pressure: Heavy
Time: 10-12 Seconds
Peel: COOL
Use a sheet of butcher/parchment paper to protect new ink for second press if needed

SUBLIMATED HEAT TRANSFERS
Pre-Press Garment for 5 seconds to get out any moisture.
Temp: 385°F
Pressure: Heavy
Time: 60 Seconds
Peel: HOT

**Use butcher paper or a teflon sheet between front and back of shirt to protect the front from bleeding through to back. Also use butcher paper (or teflon sheet) on top of design to protect the top plate of heat press from burning the shirt and transferring any color to the plate. If you see scorching or yellow discoloration, spray immediately with hydrogen peroxide and hover the top of heat press over shirt again. The heat helps it work faster. Then wash (with a dye and fragrance free detergent if reselling) it and add some peroxide to the load. Tumble dry on low.**